Product thermal capacity: 15-40 t/h
Working pressure: 1.25 MPa / 1.6 MPa / 2.5 MPa
Available fuel: Biomass pellets, rice husks, wood chips, palm shells, sawdust, etc.
Available industries: Heating, chemical, food, tobacco, textile, printing and dyeing, feed, pharmaceutical, building materials, brewing, rubber, hospitals.
Email: zhulin@zozen.com
Biomass Fired Boiler Thermal Power Plant Introduction
The DZL series tri-drum biomass boiler, developed independently by ZOZEN, is a water tube boiler. It is a biomass boiler with independent intellectual property rights. The boiler adopts an assembly structure, consisting of two main components: the upper part is the heating surface, and the lower part is the combustion equipment. The front part of the boiler body is surrounded by water-cooled walls, connected to the drum in the upper part and to the header in the lower part, forming the combustion chamber to absorb radiative heat from the furnace. The rear part of the boiler is equipped with convection tube bundles between the upper and lower drums. After the fuel is burned in the furnace, the high-temperature flue gas flows horizontally and heats the surfaces of the convection tube bundles, then enters the economizer, and finally enters the dust collector before being discharged through the chimney.
Biomass Fired Boiler Thermal Power Plant Advantage
Wide fuel adaptability: It uses biomass pellets, rice husks, wood chips, corn cobs, and sawdust
Sufficient fuel combustion: ZOZEN chain grate and independent air bin ensure thorough fuel combustion
Thermal Efficiency≥87.5%: The furnace’s dense, water-cooled tubes provide a vast radiation area
Easy operation and maintenance: Advanced controls automate fuel, ash removal, and slag discharge, streamlining operations
Biomass Fired Boiler Thermal Power Plant Specification
| Model | Rated steam capacity (t/h) | Rated working pressure (MPa) | Rated steam temperature (℃) | Maximum transport dimension (m) |
| DZL15-1.25-SCⅢ | 15 | 1.25/1.6/2.5 | 194/204/225 | 10.10×3.15×3.60 |
| 8.50×3.42×3.00 | ||||
| DZL15-1.6-SCⅢ | 15 | 1.25/1.6/2.5 | 194/204/225 | 10.10×3.15×3.60 |
| 8.50×3.42×3.00 | ||||
| DZL15-2.5-SCⅢ | 15 | 1.25/1.6/2.5 | 194/204/225 | 10.10×3.15×3.60 |
| 8.50×3.42×3.00 | ||||
| DZL20-1.25-SCⅢ | 20 | 1.25/1.6/2.5 | 194/204/225 | 10.70×3.90×3.60 |
| 9.30×3.81×3.00 | ||||
| DZL20-1.6-SCⅢ | 20 | 1.25/1.6/2.5 | 194/204/225 | 10.70×3.90×3.60 |
| 9.30×3.81×3.00 | ||||
| DZL20-2.5-SCⅢ | 20 | 1.25/1.6/2.5 | 194/204/225 | 10.70×3.90×3.60 |
| 9.30×3.81×3.00 | ||||
| DZL25-1.25-SCⅢ | 25 | 1.25/1.6/2.5 | 194/204/225 | 10.70×3.90×3.60 |
| 9.30×3.81×3.00 | ||||
| DZL25-1.6-SCⅢ | 25 | 1.25/1.6/2.5 | 194/204/225 | 10.70×3.90×3.60 |
| 9.30×3.81×3.00 | ||||
| DZL25-2.5-SCⅢ | 25 | 1.25/1.6/2.5 | 194/204/225 | 10.70×3.90×3.60 |
| 9.30×3.81×3.00 | ||||
| DZL30-1.25-SCⅢ | 30 | 1.25/1.6/2.5 | 194/204/225 | 10.00×3.36×3.60 |
| DZL30-1.6-SCⅢ | 30 | 1.25/1.6/2.5 | 194/204/225 | 10.00×3.36×3.60 |
| DZL30-2.5-SCⅢ | 30 | 1.25/1.6/2.5 | 194/204/225 | 10.00×3.36×3.60 |
| DZL35-1.25-SCⅢ | 35 | 1.25/1.6/2.5 | 194/204/225 | 10.00×4.10×3.80 |
| DZL35-1.6-SCⅢ | 35 | 1.25/1.6/2.5 | 194/204/225 | 10.00×4.10×3.80 |
| DZL35-2.5-SCⅢ | 35 | 1.25/1.6/2.5 | 194/204/225 | 10.00×4.10×3.80 |
| DZL40-1.25-SCⅢ | 40 | 1.25/1.6/2.5 | 194/204/225 | 10.00×4.44×4.30 |
| DZL40-1.6-SCⅢ | 40 | 1.25/1.6/2.5 | 194/204/225 | 10.00×4.44×4.30 |
| DZL40-2.5-SCⅢ | 40 | 1.25/1.6/2.5 | 194/204/225 | 10.00×4.44×4.30 |
