The design of the biomass hot water boiler is reasonable by pulling part of the rising tubes on both sides of the collector tube towards the inner bore. The flue gas of the biomass boiler is smooth and the flue gas from the two wings set up enters the front flue box smoothly, so that the temperature of the previous tube plate is consistent and the cracking of the tube plate caused by temperature stress is avoided.
The biomass fired hot water boiler adopts single return threaded tube in the boiler barrel, which enhances the heat transfer effect. At the same time, the threaded tube has self-cleaning function to avoid the accumulation of ash in the pipe. The front and rear arches of the boiler use water wall tubes as the support for the whole casting structure, forming a permanent arch. The rear arch is low and long, and the exit section is counter tilted. The front arch is tilted at an angle of 45° to echo the rear arch, and the coal type is highly adaptable.
The side seal structure of biomass hot water boiler is advanced and reasonable, avoiding the defects of side seal of cassette grate and the problems of uneven air distribution on both sides of grate and side seal burnout. 4t/h and below boilers adopt side seal cold angle iron strengthening plate structure. There is an independent regulating air chamber under the grate, and there are air inlets on both sides. The new curved-arm screw adjustment structure is adopted to make the air conditioning ventilation section rate reach 100%, flexible adjustment and even air distribution. Sliding door ash cleaning device.
The fuel burned in this series boiler is dropped on the fire grate by the cinder, when it enters in the furnace chamber after burning, the flame goes upward through the arch through the refractive body in the combustion chamber on both sides of the refractive body to go to the country before the smoke box, and then from the front smoke box folded into the threaded tube inside the drum, after the smoke box into the coal saver, and then the induced draft fan to the north, through the flue to the chimney to discharge into the atmosphere.
Biomass hot water boiler is a horizontal three-way water fire tube hybrid boiler with threaded flue tubes arranged in the boiler drum. It adopts secondary feeding system to effectively prevent tempering and ensure the safety of users and normal operation of the boiler.PIC operating system, fully automatic intelligent operation, LCD operation interface, fully sealed variable frequency feeding, automatic ignition, automatic temperature control, automatic conversion of fire size according to different temperature requirements, and automatic control of the whole combustion process of the furnace.ZOZEN boiler supplies all kinds of industrial boilers, and for a long time, has provided Many customers have provided high quality boiler solutions, which have been well received and trusted by customers. Welcome to consult our boiler products.
