YLW Series Biomass Fired Thermal Fluid Heater

Product thermal capacity: 1400-29000 KW

Working pressure: 0.8-1.0 MPA

Available fuel: Biomass particles

Available industries: Chemical, high temperature heating technology for fertilizer, melamine, alumina and so on

Email: zhulin@zozen.com

YLW Series Biomass Fired Thermal Fluid Heater Introduction

The YLW series thermal oil heater, with its horizontal layout and square coil tube design, uses a chain grate system for efficient fuel combustion. It incorporates mechanical features for solid fuel feeding, ventilation, and slag removal. During operation, fuel undergoes radiation and convection heat exchanges, proceeds to the waste heat boiler, and subsequently moves to the air preheater and dust remover. The remaining flue gas is then expelled into the atmosphere, resulting in optimal heat transfer and efficient industrial heating.

YLW Series Biomass Fired Thermal Fluid Heater Advantage

Digitized manufacture
  1. The laying-off of steel tube adopts CNC 3D laser cutting machine.
  2. The manufacture of square coil tube adopts CNC three-dimensional tube bending machine, no forced shaping.
  3. The manufacture of serpentuator adopts serpentuator automatic production line, once-forming.
Full argon arc welding

Square coil tube and coil tube all adopt argon arc welding technique,which guarantees tubes are 100% qualified.

Long life span
  1. The optimized radiation heating surface and convective heating surface, the medium flow is more reasonable, without overheat of the carrier and reduce the life;
  2. Convection section: optimize convection heating surface and adopt effective fix and structural support to make its working life longer.
  3. Set up effective flue gas partition for convection heating surface and cast partition to make it works longer.
Easy operation
  1. We have combustion arch patent, which is available for different types of coals, even the anthracite is very easy to burn.
  2. Flame-proof feeding bucket can avoid the feeding bucket is burnt and coking.
  3. There is ash cleaning unit, which is easy for maintaining, operating and cleaning.
Less fuel consumption
  1. Use superior refractory brick to build inside and superior perlite in the middle. Keep the furnace temperature under 50℃ to make the minimization of loss.
  2. Furnace adopts double close line coil, which makes heating surface sufficient.

YLW Series Biomass Fired Thermal Fluid Heater Specification

Model Rated thermal power (kW) Rated thermal power (×104kcal/h) Design working temperature (≤℃) Rated working pressure (MPa) Thermal efficiency (≥%) Maximum transport weight (t) Maximum transport dimension (m)
YLW-2800SCⅢ 2800 240 310 0.8 83 16.0 6.40×2.55×3.15
YLW-3500SCⅢ 3500 300 310 0.8 83 21.0 7.20×2.50×3.30
YLW-4200SCⅢ 4200 360 310 0.8 83 25.0 7.40×3.00×3.35
YLW-4600SCⅢ 4600 400 310 0.8 83 28.0 8.10×3.00×3.40
YLW-6000SCⅢ 6000 500 310 0.8 83 35.0 8.40×3.50×3.40
YLW-7000SCⅢ 7000 600 310 0.8 83 30.0 9.10×3.50×3.50
YLW-8200SCⅢ 8200 700 310 0.8 86 35.0 9.75×3.50×4.10
YLW-9400SCⅢ 9400 800 310 0.8 86 28.0 10.85×3.70×4.10
YLW-10500SCⅢ 10500 900 310 0.8 86 30.0 11.60×3.70×4.10
YLW-12000SCⅢ 12000 1000 310 0.8 86 32.0 12.30×3.70×4.10
YLW-14000SCⅢ 14000 1200 310 0.8 86 34.0 9.60×4.10×3.90
YLW-16500SCⅢ 16500 1400 310 0.8 86 38.0 11.30×4.50×4.10
YLW-19000SCⅢ 19000 1600 310 0.8 86 30.0 11.80×4.80×3.90
YLW-21000SCⅢ 21000 1800 310 0.8 86 35.0 11.80×4.80×3.90
YLW-24000SCⅢ 24000 2000 310 0.8 86 38.0 12.30×3.00×4.00
YLW-25600SCⅢ 25600 2200 310 0.8 86 22.0 12.30×3.20×4.10
YLW-29200SCⅢ 29200 2500 310 0.8 86 25.0 12.30×3.20×4.10

Please feel free to fill in the following form or email us (lexie@zozen.com) to get product information,price,service and other supports.We will reply to you within 24 hours as soon as possible.Thank You!

Name *
Country
Email *
Tel
Boiler type：
Fuel:
Pressure :

Message